Steel cut wire shot

Product Parameters

Name		Steel Cut Wire Shot
Chemical Composition	Carbon (C)	0.45～0.75%
	Manganese (Mn)	0.40～1.20%
	Silicon (Si)	0.10～0.30%
	Sulfur (S)	＜0.04%
	Phosphorus (P)	＜0.04%
Average hardness		1.0mm：40～50 HRC 1.5mm：41～45 HRC
Hardness deviation		Maximum deviation range is ±1.0HRC or ±40HV
Tensile strength		1.0mm：1750～2150 Mpa 1.5mm：1250～1450 Mpa
Metallurgical structure		Longitudinal (uniformly deformed pearlite) Transverse (uniformly deformed pearlite)
Minimum density (determined by alcohol replacement method)		7.8g/cm3

Product Specifications

1.0MM

1.2MM

1.5MM

1.8MM

2.0MM

2.5MM

3.0MM

Application

1. Cleaning: shot blasting, shot peening, die casting cleaning, casting shot blasting, forging shot blasting, forging shot peening, casting sand cleaning, steel plate cleaning, steel cleaning, steel plate cleaning, H-beam cleaning, steel structure cleaning.
2. Rust removal: shot blasting, shot peening, casting rust removal, forging rust removal, steel plate rust removal, forging oxide scale removal, steel rust removal, H-beam rust removal, steel structure rust removal.
3. Strengthening: shot blasting, heat treatment parts shot peening, gear shot peening.
4. Shot peening: steel shot peening, steel sand blasting, ship plate shot peening, steel plate shot peening, steel shot peening.
5. Shot blasting: steel plate shot peening, steel shot peening, steel shot peening.
6. Sand blasting: sand blasting.
7. Pretreatment: coating pretreatment, coating pretreatment, surface pretreatment, ship plate pretreatment, steel pretreatment, steel pretreatment, steel plate pretreatment, steel structure pretreatment.